Field of applicationandnspsp;
Thanks to the 4-sided coating of the pressure-distributing foam, the grinding KA.EF.shrink discs are ideal for the processing of foundations, edges and flanges. They are very aggressive and robust while maintaining the same surface structure
Sanding shrink discs are used (dry and wet sanding) in the wood, paint and varnish processing industry for sanding paint, foundations and other materials;old lacquer, when sanding wood, metal, plastic before the application of paint, when sanding paint in and on foundation and on the floor, as well as when removing paint coatings and coating flaws, when sanding the intermediate lacquer and sanding out lacquer flaws.
Material
- approx. 100x70x27mm
- 4-sided aluminium oxide
- Foam medium firm
From KA.EF.
KA.EF. Foam backing abrasives are used today in all applications (dry and wet) where a flexible abrasive is required. They are the solution to many grinding problems. Simple, fast and safe. Special attention should be paid to the direct coating of the foam with abrasive grain, which results in a considerably finer sanding pattern.
KA.EF. Abrasive on foam backing | comparable with | approx. like abrasive on paper/fabric backing |
Kundouml;rnung 36 | roughly | Grit (p) 80 |
Kundouml;rnung 50 | medium | Grain (p) 100 |
Kundouml;rnung 60 | medium | Grain (p) 150 |
Kundouml;rnung 80 | medium | Grain (p) 180 |
Kundouml;rnung 100 | fine | Grain (p) 220 |
Kundouml;rnung 120 | fine plus | Grain (p) 240 |
Kundouml;rnung 150 | fine plus | Grain (p) 280 |
Kundouml;rnung 180 | extremely fine | Grain (p) 320 |
Kundouml;rnung 220 | super fine | Grain (p) 500 |
Kundouml;rnung 280 | superfine | Grain (p) 1000 |
Kundouml;rnung 320 | ultra fine plus | Grain (p) 1500 |
Kundouml;rnung 400 | micro fine | Grain (p) 2500 |
Kundouml;rnung 600 | micro fine plus | Grain (p) 4000 |
The trundauml;ger is foam. This is why scattered grain and the achieved grinding pattern differ in comparison to sandpaper
We therefore state Grain = scattered grain / picture = corresponds approximately to the grinding pattern of sandpaper (e.g. grain 100 for abrasives on foam = comparable sandpaper approx. p 220).
Materials
- Aluminium
- Hardwood
- Soft steel / carbon
- Non-ferrous metals
- Varnish sanding
- Paints
- plastic
- Foundation
- Primer
- Solid surface material
- Stainless steel
- Steel
- Copper alloys / brass / bronze
- Fiber Optics
Main applications
- Automobile repair
- Painter undamp; drywall construction
- Wood
- Metal
- Plastics
- Marine industry
- Automotive Industry
- Content: 1,00